Specifications include, but are not limited to: 1. Size a. 20’ X 8’ X 8’ b. 8’ Ceiling Height c. Ground mounted 2. Exterior a. All steel or aluminum structural components b. Steel or aluminum siding c. Weather resistant and water tight 3. Interior a. Vinyl tile or composite floors b. Minimum R-11 insulation in walls and ceiling c. Prefinished interior walls and ceiling d. Blinds on all windows e. High security door system with lock f. Hydraulic door closure g. Slider windows with insect screens h. Interior lighting switches and power receptacles 4. HVAC and Electrical a. QUICK CONNECT electrical hook-up on exterior for generator power b. 120/240 Volt Single Phase c. 125 amp breaker panel d. Vertical HVAC e. Fluorescent ceiling lights 5. For the rental of as many as ten (10) security office units, DOTD will require delivery within eighteen (18) hours of notification. 6. The vendor will be responsible for maintaining, deodorizing and cleaning of the rental units and will be responsible for all costs in the cleaning of the units. The security office must be clean at the time of delivery. At the time of pickup of the security office unit, the vendor will be responsible for cleaning both the exterior and interior of the unit. 7. DOTD will assume no responsibility for the condition of the security office unit. All security office units will be adequately insured by the vendor and DOTD will assume no responsibility for the security office units.