Specifications include, but are not limited to: UNITE (or equal) PANELS: Panels must include panel frame, tiles, base components, top caps, adjustable glides, and panel to panel connection hardware. Panels must meet the flammability requirements as defined in the ANSI/UL 1286 safety standard for Office Furnishings. Frame construction frames shall be welded. Top and bottom horizontal rail of 16 gauge steel or thicker. Vertical posts of 16 gauge steel or thicker with slots that should be at approximately 1” increments. Top cap mounting clip should be 20 gauge or thicker spring steel with channel to route data cables. Fastened with screws to all top horizontal rails. Glide house molded plastic that provide a minimum 3” range of adjustment. Wireway mounting bracket used on bottom and beltline raceway in powered assemblies. Warranty – Lifetime ARISTOTLE (or equal) CASEGOODS All work surfaces, tops and end panels must be a minimum of 1” thick. Bookcases must have a minimum 1” thick top and shelves. Edge banding must be at least 2.5 mm thick and match laminate finish chosen by BRCC. Must have adjustable glides to keep surfaces level. Edge Detail must have minimum 1” thick work surface and top flat edge banding minimum 2.5 mm. Drawers must have five sided construction with full depth. Pedestal must have pencil tray in the upper drawer box. File Drawers must accommodate letter and legal filings. Lateral files should have anti-tip interlock system. Overheads must have full width, concealed cable pass-through. Wall mount overheads must include mounting hardware Grommets must be available on casegoods. End panels and Modesty Panels must be full height.