Specifications include, but are not limited to: Fuel dispenser for single suction pump dispenser
Up to 22 GPM/83 LPM at the discharge.
Dispensing gasoline, including standard oxygenated blends; diesel, including biodiesel blends up to 20% (B20); and kerosene.
Register display on each side of cabinet.
Non-resettable accumulative totalizer, display on the front dial face.
All register openings covered with tempered or double-strength glass (no plastic).
Register to include a 10:1 pulser and a DC junction box provided in the hydraulic cabinet for wire terminations.
Cabinet: All exterior panels made from galvannealed steel for corrosion resistance. Side panels 14-gauge minimum.
Finish: Powder-coated metallic silver sides, top, bezel, and base with blue lower doors.
Doors hinged, 18-gauge minimum, Lockable.
Panel to be located at the top of the cabinet on each side for product identification.
Light needed to illuminate the register faces and backlights the product identification panels.
A hose mast with heavy duty spring base and top swivel connector should be supplied.
One (1) positive displacement, stainless steel sleeved, two-piston meter with Teflon piston cups.
One (1) belt-driven gear type pumping unit with integral air separator. Vane pumps are unacceptable.
One (1) 1-HP minimum 115VAC/230VAC continuous duty motor.
An explosion-proof junction box to be provided in the hydraulic cabinet for all AC wire terminations.
The junction box to include a wire from the reset to provide a reset complete signal to an external control system.