Specifications include, but are not limited to: 1. Cab & Chassis 1.1. GVWR: 19,500 lbs. 1.2. Frame: 600,000 RBM (Resisting Bending Movement) 1.3. Cab to axle (CA) and axle to end of frame (AF) 1.3.1. CA: 84.1 inch 1.3.2. AF: 50.8 inch 1.4. All steel front bumper and 2 frame mounted tow hooks 1.5. Cab 1.5.1. Conventional day cab 1.5.2. Tinted safety glass 1.5.3. Cab entry handles, driver and passenger side 1.5.4. Outside mirrors, driver and passenger side 1.5.4.1. Power adjustable 1.5.4.2. Heated 1.5.4.3. Convex spot mirrors 1.5.S. Manufacturer's highest level sound insulation package 1.5.6. 40/20/40 vinyl split bench seat with fold down center console/arm rest 1.5.7. Gauge package including the following: 1.5.7.1. Coolant temperature 1.5.7.2. Fuel 1.5. 7 .3. Oil pressure 1.5. 7.4. Speedometer 1.5.7.5. Tachometer 1.5.7.6. Gear indicator 1.5.7.7. Odometer 1.5.7.8. Trip odometer 1.5.7.9. Auto transmission temperature 1.5.8. Dual sun visors 1.5.9. Two (2) cup holders, mounted in dash or center console 1.5.10. Climate control, including air conditioning, heater, and defroster 1.5.11. Power windows and door locks 1.5.12.. Tilting and telescoping steering wheel 1.5.13. Driver and passenger airbags 1.5.14. Running boards/cab entry steps 1.6, Engine and fuel 1.6.1. 6.7L 1-6 OHV diesel direct injection, 24 valve intercooled, 8 cylinder 1.6.2. 800 HP FT-LBS @ 1800 rpm 1.6.3. Fuel tank: 52 gallon minimum capacity 1.7. Transmission 1.7.1. 6-Speed electronic sequential shift control automatic, with overdrive, lock-up driver selections with PTO provision 1.7.2. To be filled with manufacturer approved synthetic lubricants 1.8. PTO 1.8.1. PTO must be activated by dash mounted factory upfitter switch 1.8.2. Indication of PTO engagement should be accomplished by lighted switch or separate dash mounted indicator light 1.9. Front Axle 1.9.1. 7,250 lbs. GAWR @ ground capacity 1.9.2. Shock absorbers, heavy duty 1.9.3. Integral power steering 1.10. Rear axle 1.10.1. 13,500 lbs. GAWR @ ground capacity 1.10.2. Shock absorbers, heavy duty 1.10.3. Limited slip or locking differentia
