Specifications include, but are not limited to: The airboat shall be fully operational upon delivery (Delivered to 2000 Quail Drive Baton Rouge, La. 70898) ARO 6-8 weeks The airboat shall conform to all federal, state, and marine safety regulations. The airboat shall be constructed in accordance with or exceed industry standards for this type of vessel. Reconditioned or used parts will not be accepted. Marine Grade Aluminum Alloy No prototypes, the airboat must already be in production so that reviews can be conducted with other agencies. The airboat must be available for marine surveyor inspector. HULL Hull shall be 15’ long with an 8’ beam V-Crimped sides – 8 Degree Bottom (One piece bottom – No splicing) 28” side height Transom and bottom shall be constructed of .190 (5086) Marine Grade Aluminum Bottom running surface of the hull will have 3/8” inch black UHMW Marine Polymer, Siliconized-crack resistant from within 8” of bow to stern (Full Bottom of Hull) 3/8” UHMW black polymer nut & bolted on bottom of hull ¼” UHMW black polymer screwed on sides of hull Bow cap, bulkhead, and sides shall be constructed of .125 (5086) Marine Grade Aluminum 9 – 2” x 2” x 3/8” aluminum T-bar stringers - Entire length of hull w/.190 aluminum gussets on every T-Bar One – 3” Aluminum I-beam cross brace Transom height of 26” Hull to be natural aluminum finish.