Specifications include, but are not limited to: Guaranteed Lifetime Protection TEST AND INSPECT Visually INSPECT and TEST equipment to determine its operating condition and efficiency. TEST for excessive vibration, motor winding resistance, refrigerant charge, fan RPM, refrigerant oil (acid), water condition, flue gas analysis, safety controls, combustion and draft, crankcase heaters, control systems, etc. INSPECT for worn, failed, or doubtful parts; mountings; drive couplings; oil level; rotation; soot; flame composition and shape; pilot and igniter; steam, water, oil, and/or refrigerant leaks, etc. PREVENTATIVE MAINTENANCE to include services required to clean, align, calibrate, tighten, adjust, lubricate, and paint equipment. CLEAN coil surfaces; fan impellers and blades; electrical contacts; burner orifices; passages and nozzles; pilot and igniter; cooling tower baffles, basin, sump, and float; chiller, condenser, and boiler tubes, etc. ALIGN belt drives, drive couplings, air fins, etc. CALIBRATE safety controls, temperature and pressure controls, etc.