Specifications include, but are not limited to: New 2023 MV607 SBA (MV607) AXLE CONFIG: 4X2 APPLICATION: Dry Van MISSION: Requested GVWR: 25999. Calc. GWWR: 25999 Calc. Start / Grade Ability: 24.58% / 1.72% @ 55 MPH Calc. Geared Speed: 79.5 MPH DIMENSION: Wheelbase: 254.00, CA: 186.90, Axle to Frame: 114.00 ENGINE, DIESEL: {Cummins B6.7 220) EPA 2021, 220HP @ 2400 RPM, 520 lb-ft Torque @ 1600 RPM, 2600 RPM Governed Speed, 220 Peak HP (Max) TRANSMISSION, AUTOMATIC: {Allison 2500 RDS) 5th Generation Controls, Wide Ratio, 5-Speed with Overdrive, with PTO Provision, Less Retarder, with 33,000-lb GWW and GCW Max, On/Off Highway CLUTCH: Omit Item (Clutch & Control) AXLE, FRONT NON-DRIVING: {Meritor MFS-12-122A} l-Beam Type, 12,000-1b Capacity AXLE, REAR, SINGLE: {Dana Spicer S140} Single Reduction, 21,000-lb Capacity, 190 Wheel Ends Gear Ratio: 5.29 CAB: Conventional, Day Cab TIRE, FRONT: (2) 11R22.5 Load Range G FUEL MAX RSA (GOODYEAR), 497 rev/mile, 75 MPH, All-Position TIRE, REAR: (4) 11R22.5 Load Range G AH37 (HANKOOK), 501 rev/mile, 75 MPH, All-Position SUSPENSION, REAR, AIR, SINGLE: {International IROS} 21,000-1b Capacity, 9.25" Ride Height with Shock Absorbers PAINT: Cab schematic 100WP Location 1: 9219, Winter White (Std) Chassis schematic N/A Description Base Chassis, Model MV607 SBA with 254.00 Wheelbase, 186.90 CA, and 114.00 Axle to Frame. AXLE CONFIGURATION {Navistar} 4x2 FRAME RAILS Heat Treated Alloy Steel (120,000 PSI Yield); 10.250" X 3.610" x 0.375" (260.4mm x 91.7mm x 9.5mm); 456.0" (11582mm) Maximum OAL BUMPER, FRONT Contoured, Steel CROSSMEMBER, REAR, AF (1) WHEELBASE RANGE 199" (505cm) Through and Including 254" (645cm) AXLE, FRONT NON-DRIVING {Meritor MFS-12-122A} l-Beam Type, 12,000-b Capacity SUSPENSION, FRONT, SPRING Parabolic Taper Leaf, Shackle Type, 12,000-Ib Capacity, with Shock Absorbers Includes : SPRING PINS Rubber Bushings, Maintenance-Free BRAKE SYSTEM, AIR Dual System for Straight Truck Applications 4091 Includes : BRAKE LINES Color and Size Coded Nylon : DRAIN VALVE Twist-Type : GAUGE, AIR PRESSURE (2) Air 1 and Air 2 Gauges; Located in Instrument Cluster : PARKING BRAKE CONTROL Yellow Knob, Located on Instrument Panel : PARKING BRAKE VALVE For Truck QUICK RELEASE VALVE On Rear Axle for Spring Brake Release: 1 for 4x2, 2 for 6x4 : SPRING BRAKE MODULATOR VALVE R-7 for 4x2, SR-7 with relay valve for 6x4/8x6 DRAIN VALVE {Berg) with Pull Chain, for Air Tank AIR BRAKE ABS {Bendix AntiLock Brake System} 4-Channel (4 Sensor/4 Modulator) Full Vehicle Wheel Control System AIR DRYER {Bendix AD-9} with Heater BRAKE CHAMBERS, FRONT AXLE {Bendix} 20 Sqin BRAKE CHAMBERS, REAR AXLE {Bendix EverSure) 30/30 SqIn Spring Brake SLACK ADJUSTERS, FRONT {Gunite} Automatic SLACK ADJUSTERS, REAR {Gunite) Automatic AIR COMPRESSOR {Cummins) 18.7 CFM AIR DRYER LOCATION Mounted Outside Right Rail, Forward of Front Wheel AIR TANK LOCATION (2) Mounted Under Battery Box, Outside Left Rail, Back of Cab, Perpendicular to Rail BRAKES, FRONT {Meritor 15X4 Q-PLUS CAST) Air S-Cam Type, Cast Spider, Fabricated Shoe, Double Anchor Pin, Size 15" X 4", 13,200-1b Capacity BRAKES, REAR {Meritor 16.5X7 Q-PLUS CAST) Air S-Cam Type, Cast Spider, Fabricated Shoe, Double Anchor Pin, Size 16.5" X 7", 23,000-lb Capacity per Axle STEERING COLUMN Tilting STEERING WHEEL 4-Spoke; 18" Dia., Black STEERING GEAR (Sheppard M100} Power
