1 Steel pipe, 72” OD x ½” wall x 40’, with 5/8” thick by 80” OD x 72” ID steel stiffener plates welded in place every 10’ starting 5’ from end. Entire assembly epoxy coated inside and outside, except the final 6” on each end shall not be coated. See markup drawing in Appendix A and drawing set in Appendix B. Miter cuts will be field cuts by the Sewerage and Water Board. Quantity 3; 2 Steel pipe, 72” OD x ½” wall x 40’, with 5/8” thick by 80” OD x 72” ID steel stiffener plates welded in place every 10’ starting 5’ from end. Also, each includes a 24” manway per drawing 11066- W-26 sheet 18. Entire assembly epoxy coated inside and outside. See markup drawing in Appendix A and drawing set in Appendix B. Miter cuts will be field cuts by the Sewerage and Water Board. Quantity 3; Steel pipe or round tube – 72” OD x 3/4” wall x 6’ with 5/8” thick by 80” OD x 72” ID steel stiffener plate welded in place at center of each with pipe stops, epoxy coated inside and outside, except final 6” on one end shall be uncoated for welding. See markup drawing in Appendix A and drawing set in Appendix B. Miter cuts will be field cuts by the Sewerage and Water Board. Quantity 3; Dresser P/N 0038-0065-950 – 72” OD Style 38 Coupling with a 1/2" X 10” middle ring and with plain grade 27 gaskets including required restraint rods, connecting ears and all accessories for connecting to pipes Quantity 9
