Specifications include, but are not limited to: Contractor shall bore holes and install five aluminum poles 30 ft. in height. Contractor shall provide and set one wooden pole 30 ft. in height at 6’ below grade for the main power supply panel (the five aluminum poles shall be provided by LDH). Please refer to Attachment D for pole locations and numerical designations. Contractor shall install foundations on aluminum poles. Foundations shall be constructed of concrete (3,000 PSI), 10’ deep and 2’6” in diameter. Foundation shall include 5/8” reinforcing bars at 12” center. Contractor shall provide and install one ¾” copper ground rod at each pole. Contractor shall provide and install 1” galvanized rigid steel 90 degree elbow at each pole foundation from all underground PVC conduit going to the each pole foundation. (see Attachment D for circuit locations). Contractor shall provide and install a 1” PVC 36’’ below grade to feed each light pole from the main power pole (see Attachment D for circuits) Contractor shall provide and install two #6 AWG line and neutral and #10 AWG ground wire to all poles for lighting circuits on all new aluminum poles. Measurements from pole to pole are listed (see attachment D). Contractor shall provide and install 13 Halco SAL-300w 5000k flood light fixtures in total on the new aluminum poles. These listed lights are what we request because these are the lights that we use at our entire facility...