Specifications include, but are not limited to:12 EACH PINPOINT WALK-THROUGH METAL DETECTOR as per following specifications: -To include multiple channels and a minimum of 2,300 electable operating frequencies. -Minimum of 20 standard program settings. -Universal “wait” and “proceed” symbols at the detector entrance for traffic controls. -Manage walkthroughs individually or as groups and perform statistical analysis via network with CMA interface module. Supervisors can remotely access controls, visual alarms and statistics. -Directional counter with a minimum of four settings for counting patrons; forward only, reverse only, subtract in reverse, and bidirectional. -Ability to analyze targets across a wide range of frequencies. - Provide ferrous and non-ferrous detection. - To provide uniform detection and precise pinpointing via independent zone indicator light on both side panels. - Dual-sided detection to allow scanning from both sides and uniform detection results throughout the archway. - Menu based settings for feature selections. - Field programmable to allow system upgrades. Ability to install multiple units >= approximately 2 inches. - Tamper proof – settings are secured with a key lock and minimum of two levels of access codes. Cabinet lock that prevents unauthorized access to physical cables, connectors and electronics. - Modular design. - DSP based technology
