Specifications include, but are not limited to:1. Polish all desks and furniture. 2. Clean all synthetic furniture covers. 3. Clean all interior blinds and glass handrails throughout the facility. 4. Perform all functions specified under Section 13.A “Daily Service Requirements” once each quarter in all unoccupied areas. E. SEMI-ANNUAL SERVICE REQUIREMENTS: 1. Shampoo all carpeted areas, offices, hallways, etc. 2. Extract or bonnet clean all hallway carpets and lobbies. 3. Clean interior of all remaining windows and window walls in occupied areas. F. ANNUAL SERVICE REQUIREMENTS: 1. Clean all overhead light fixtures. 2. Strip, re-wax, and buff all vinyl tile, soft flooring, terrazzo, ceramic tile, and brick paved floors. 3. Extract clean all carpeted areas (to be accomplished by use of extraction method). 4. Shampoo extract all carpeted areas (during Christmas break). 5. Low-pressure wash all exterior windows, glass and frames and clean interior glass in all unoccupied areas. 6. Thoroughly clean all interior glass windows, doors, curtain wall, etc. G. UTILITY WORK, FLOOR MAINTENANCE, FREQUENCY SCHEDULE FOR VINYL, VINYL ASBESTOS, OTHER SOFT FLOORING, CARPET, CERAMIC FLOOR, AND TERRAZZO. 1. The Contractor’s floor maintenance calendar schedule, once approved, will be used and adhered to with no changes from the schedule unless approved by the Agency representative. 2. FLOOR PROCEDURES: Sweep, dust mop, remove residue from floor. Wet mop with proper cleaners. Hi-speed or scrub as required to remove black marks, let dry and apply proper coating as per manufacturer’s instructions. QUALITY CONTROL STANDARD: Glossy shine with no powdering or streaked appearance. Walls, doors, frames, and furniture shall be free of residue.
