ction 8.0 Bid Specifications: • Provide labor, materials, equipment, tools, construction equipment, machinery, incidentals, and other facilities and services necessary to deliver a comprehensive “TurnKey” modernization that meets or exceeds current code compliance standards. • Furnish and install equipment utilizing existing and modified hoistway and machine rooms. • All materials for this project must be new, bidder-supplied. • No more than one elevator shall be out of service in a group of elevators (not including a second car out of service for more than sixty minutes for regular preventive maintenance during non-peak traffic periods). • No Interruptions or changes in regular group automatic operation during normal business hours. • Firefighter’s Emergency Operation Phase I or II is not activated during regular business hours. • No activation of Standby Power Operation during regular business hours. • No large equipment shall be transported through public or tenant spaces during regular business hours. • The Bidder shall verify that the specified materials and equipment will fit into the designated spaces and that, when installed in accordance with the manufacturer’s guidelines, they will ensure a complete, coordinated, satisfactory, and properly operating system. • Equipment shall be installed so it may be easily removed for maintenance and repair. • All equipment shall have maximum accessibility, safety, and continuity of operation. • This project is a significant elevator modernization in an existing building open to the public, and business will continue to operate throughout all phases of required work. • The bidder must give special attention and priority to all matters concerning project safety, protection from dust and loose materials, noise reduction, protection from water and air infiltration into the building, and maintaining neat conditions in and around work areas inside and outside the building. • All packaging, scrap materials, and demolition debris shall be removed daily from the building and site. • Provide visible warning and direction signs, barricades, temporary lighting, overhead protection, and hazard-free walking surfaces throughout public areas. • All significant components of mechanical and electrical equipment shall have identification plates with the Manufacturer’s name, address, model number, rating, and any other information required by governing codes. • Within 30 days of final acceptance, provide three sets of neatly bound written information necessary for proper maintenance and adjustment of equipment. Include the following as minimums.
