18'x54" Boat This line has been approved as proprietary and only the brand and model listed will be accepted. * All items must be compatible and work together. Brand: ProDrive Model: X Series TD Edition •18’ Long, 54" Wide, 21" Sides, 74" Beam, and 20" Transom •Constructed of 5086 Marine Grade Aluminum •.125 aluminum plate for hull construction •Hull bottom and sides constructed (crimped) out of one plate forming hull (no welded seam at chine; Rake of hull to be welded at chine) • Six 1" x 2" Rectangular aluminum tubing for ribs running the full length of the hull •2" x 2" Square aluminum tubing used for bracing the floor and side walls of hull (2" x 2" hull structure to also accommodate multi-position seat box). •2" x 4" aluminum channel butted together on transom to accommodate motor mounting •.100 aluminum plate sub floor mounted to ribs with aluminum rivets Hull Features •Battery Switch (Blue Sea Mini or equivalent) •Motor Battery Tray •T-Rail Gunnel Section to accommodate accessory mounting •Multi-Position Seat / Gun Box •14 Gallon Alum. Tank •Painted Hull (Dead Grass Brown; Sherwin Williams or equivalent) •Trolling Motor Bracket •LED Navigation Lights •Heavy Duty Front Bumper Constructed of 3" aluminum pipe •4’ long Enclosed Front Deck with Hatch •20" long Extended Deck to protect fuel tanks •Sub floor with Non-Skid Paint •Electrical Control Panel with USB Ports and 12-volt Accessory Plug •500 GPH Bilge Pump (Rule Manual or equivalent) Surface Drive Motor This line has been approved as proprietary and only the brand and model listed will be accepted. * All items must be compatible and work together. Brand: ProDrive Model: XRF50 Motor Features •50hp long shaft model •Tiller Steer Motor •Gear Driven Lower Unit •Full Power Reverse (180-degree rotation of lower unit assembly) •Instant Forward and Neutral •Instant Prop Reverse Option • Momentary Forward and Reverse Button •Tach / Hour Meter •Hydraulic Power Trim • Aluminum and Stainless Construction •1" Hex Propeller Shaft to accommodate 2-blade propeller recommended for loaded vessel •Gen 5 Lower Unit 1.5 to 1 Gear Reduction •Group 24 Marine Battery and Battery Box •Marine 50hp powerhead •Factory rigging. Motor to be factory installed. All electrical wiring must be terminated, fused, wrapped, and connected. Completed boat must be water tested of all systems and accessories before delivery / pickup.
