Specifications include, but are not limited to: VETERANS MEMORIAL HIGHWAY (KY 2154) (MP 4.601) BEGIN AT US 68 EXTENDING NORTH TO KY 3221 (MP 6.576), A DISTANCE OF 01.97 MILES.PAVEMENT (WITH ALTERNATES) GEOGRAPHIC COORDINATES LATITUDE 37:32:46.95 LONGITUDE 85:16:30.38 This work consists of constructing a cold -laid, polymer -modified, emulsified asphalt pavement course to fill ruts or provide an intermediate or surface course for existing pavements. The paving mixture is composed of a polymer -modified emulsified asphalt, crushed aggregate, mineral filler, water, and possibly other additives. Follow the requirements outlined in ASTM D 6372, Standard Practice for Design, Testing, and Construction of microsurfacing, with modifications as found in this note. Apply this material according to the lines, grades, and typical cross -sections in the plans or as established by the Engineer. 2. 1 Mineral Filler. Use Portland Cement, Type I, conforming to Section 801. 2.2 Aggregate. Provide 100 -percent crushed aggregate conforming to Sections 804 and 805. Contrary to Subsection 403.03.03, provide polish -resistant aggregate in the asphalt mixture conforming to one of the following requirements: Microsurfacing Type A · 100 percent of total combined aggregate is Class A polish -resistant aggregate. · Microsurfacing Type B · 100 percent of total combined aggregate is Class B or Class A polish - resistant aggregate. · Microsurfacing Type D · No polish -resistant aggregate requirements.