Specifications include, but are not limited to: Provide a camera for a MD530F helicopter that provides both day, thermal imaging, and low light capability with the specifications below. Turret specifications: 10.25" max turret dia. (excluding connector interface) (less than 11”) 14.0" max turret height (excluding mounting interface) 38 lb's max turret weight (excluding mounting interface) (can be set at 40lb’s max) Four Axis active stabilization 2 axis inner (pitch/yaw) and 2 axis outer (azimuth/elevation) Axis passive vibration isolation (pitch/roll/yaw) Fully integrated/compatible with the Churchill ARS, AeroComputers UC-6000, CartNav AIMS and Force X mapping systems 15 micro-radian or less typical stability on all sensors without the use of external vibration isolator, fast steering mirrors or other electronic image stabilization methods. Elevation Coverage: +90⁰ to -120 Azimuth Coverage: 360⁰ continuous Integrated missile grade IMU mounted on the optical bench to support both gimbal stability and geo-pointing (co-located with imaging sensors). ≤2.5 mrad pointing typical accuracy. Embedded GPS. 1920 X 1080 CMOS HD color sensor with 30.2⁰ x 1.2⁰ optical HFOV (720P). 1080p or 720p video format Ruggedized Hand Controller with integrated backlighting, not to exceed 2.2Lbs and 4.25’ (W) x 9” (L) x 3” (D) Support: Field Support technicians for on-site service support Multiple North American support/repair centers 24 month / 1,000 hour standard warranty