Specifications include, but are not limited to: MX-10 Flight Camera or approved equivalent. This will be installed on KSP's Bell 206L3 Longranger Helicopter. Provide a camera system for a Bell 206L3 helicopter that provides both day, thermal
imaging, and low light capability with the specifications below.
- 10.25" max turret dia. (excluding connector interface) (less than 11”)
- 14.0" max turret height (excluding mounting interface)
- 38 lb's max turret weight (excluding mounting interface) (can be set at 40lb’s max)
- Four Axis active stabilization
2 axis inner (pitch/yaw) and 2 axis outer (azimuth/elevation)