Specifications include, but are not limited to: The contractor must apply a tack coat to the exposed surface. The tack coat must be
SS1h or equal (0.10 gal./s.y.).
The contractor must pave the driveway and parking lot with Class I bituminous paving
surface mix to a compacted depth of one and one-half inches.
When the contractor must end the paving or make transitions at intersections or ends of
paving, there must always be an edge key cut to receive the new bituminous surface mix
Prior to surface paving, the contractor must pave a leveling course of Class I bituminous
paving surface mix from the existing surface at the designated area as shown on the
plan and marked in the field.