General Existing Plan Notes: Refer to new floor plans to determine demolition required. Not all existing elements are shown. General Contractor shall be responsible for field verifying all required dimensions. The General Contractor is responsible for field verification of respective dimensions and existing conditions. The use of these Contract Documents by any contractor, subcontractor, supplier, or manufacturer in lieu of preparation of shop drawings, implies acceptance of information shown as verified. This action obligates the user to pay any expense arising due to errors that are a result of forgoing field verification. General Floor Plan Notes: All dimensions on floor plans are from face of finish gypsum board, face of masonry, face of concrete or centerline of columns unless noted otherwise. Provide wood blocking in walls and ceiling as required for installation of casework or other surface mounted accessories. Provide sound batt insulation at all interior walls. Interior door frame jambs typically located 4" from adjacent wall unless noted otherwise. Paint all new walls (1 layer base & 2 layer finish); color selected by Owner. General Casework notes: Apply continuous clear silicone sealant where counter top/backsplash meets walls; after painting is complete. All exposed casework ends to be laminated. Provide (1) one shelf in each base cabinet with adjustable mount. Exterior finish shall be selected by Owner from full line of laminate (Basis-of-Design is Formica). Interior finish shall be white melamine. Counter finish shall be selected by Owner from full line of laminate (Basis-of-Design is Formica).
