Plasma Cutting Machine All system components, including the plasma power source, cutting table, CNC motion controller, and CNC software must be manufactured, supported, and serviced by the same manufacturer. Minimum Requirements: System Components (All from a Single Manufacturer): Plasma power source 460V 125 amp Cutting table CNC motion control system CNC software package (allow the transfer of old files to new system) Quick Cam Fabrication Nesting Package Electric Plateguard 55 gallon drum Construction: Machine must be constructed of 3/16" steel Must weigh a minimum of 6,000 lbs Training: One (1) full day of on-site training must be included in the purchase Setup/Delivery/Installation shall be included inthe bid price. Performance Recommendation: It is recommended that the proposed system be equivalent in performance and construction to the Torchmate 5100 system 2 Plasma Cutting Machine Trade In Vendors shall submit price to pay KYTC for the trade in of current Plasma Cutting Machine. If you do not wish to offer a trade in please enter 0.00 The Kentucky Transportation Cabinet currently owns one (1) 2012 Torchmate Model S2 Plasma Water Table, 5 x 10, which will be offered as a trade-in toward the new CNC Plasma Cutting System. Vendors shall include the trade-in value as a separate line item on their bid response. The existing unit is in fair condition but will be sold as-is, where-is, and must be removed by the awarded vendor upon installation of the new system.S2 Plasma Water Table Vin #. 228130 Original Cost. $44,054.45 Condition Fair.
