Specifications include, but are not limited to: Remove roof panels from east half of roof and any roof supports necessary to remove pump and motor from the building. Roof and supports will be replaced once pump and motor are placed back in operation. Disconnect electric service to pump motor and secure wiring such that electric service to pump house is not interrupted during removal and installation. Electric service will be reconnected after overhaul and a certified electrician will test to determine proper rotation. Remove pump and discharge pipe, a 50 ton crane is recommended. Estimated weight of the pump is 8,000 lbs. Length of pump is forty-eight feet so a minimum of fifty foot trailer will be need for transport to repair location. Pump house has eight-foot sidewalls. Center of road to center of pump house is forty-eight feet.