Specifications include, but are not limited to: Units offered shall be new, standard production models of the latest design in current production. Unit should be a Bonnell Road Maintainer 312 or equivalent. Materials shall be of good commercial quality for the intended service and shall be produced by use of current manufacturing processes. Material shall be treated to resist rust, corrosion, and wear. The bidder shall list any variations from, or exceptions to, the conditions and specifications of this bid. The price or prices quoted shall include all transportation charges fully prepaid to Cheney Wildlife Area located approximately 20 miles south of Hutchinson, Kansas. Purchaser desires delivery to be completed within 30 days from date of award. The purchaser reserves the right to reject any or all bids. Unit shall have height adjustable front hitch with drop pin clevis hitch and loop. Safety tow chains included. • Unit shall have adjustable wings for varied drag width • 4 x 10 double acting or single acting lift cylinder • 3000 lb. drop foot jack stand for quick and easy hook up and storage • 6 bolt high speed hubs and tires • Easily adjustable rear finishing blade height control without the use of tools • Fully welded tubular upper and lower frames • Weight shall not exceed 3100 LBS • 22’ length with 20’ working section • 10’ cutting width (Adjustable to 8’ wide) • 5/8” X 8”, C1080 high carbon steel, punched to AASHTO standard cutting edge • (2) 16” Radial tires w/high speed hubs • 4” X 10” Double acting or single acting cylinders • Six cutting and mixing blades with one finishing blade at the rear. • Must be compatible with John Deere 6110 tractor with 110 HP