Specifications include, but are not limited to: Tubular Steel Columns and Beams: Standard column dimension shall be 5” x 5” x 3/16” tubular steel welded to 5/8” base plates for surface mounting. Main support beams are 7” x 5” x 3/16” and purlins are 6” x 4” x 3/16”. Roofing: 24 gauge pre-cut steel Multi-rib panels with Kynar 500 or equivalent finish to resist fading and corrosion in an “evergreen” or equivalent color on the top, white underside acceptable. Standard roof slope of 4:12 pitch with an eave height of 8’-0”. Roof attached to structural frame with exposed corrosion resistant screws painted to match roof’s “evergreen” color. Matching 24 gauge trim to be included. Roof Deck: 2” x 6” (nominal) #1 Grade, end matched, single tongue and groove with V-joint bottom face, kiln-dried to an average of 15% moisture content, Southern Yellow pine.