Specifications include, but are not limited to: 1.1 STEEL OR ALUMINUM GATE A. The materials used for cantilever gate framing shall be manufactured from steel or aluminum. B. Gate shall be finished with a copper vein color and then a clear powder coat applied. C. Top-mounted sliding hardware. D. Gate shall be constructed 4’ high to fit across a 24’ opening. E. The design of the gate shall be manufactured as illustrated in the attached photos. F. Max. gate capacity shall be 2200 lbs. / 75’ G. Steel material for fence post. 1.2 GATE OPERATOR AND MOTOR A. Gate operator shall be a 1 horsepower, 110 volt motor. B. Operational voltage shall be 24 VDC C. Operator shall function with single phase electricity. D. Motor cabinet shall be rodent-proof and shall be colored to match a weathered wood or rusted metal look, to be determined on a later date by the park manager. E. Operating temperature -20 F to +158 F 1.3 ELECTRONICS AND CONTROLS A. Operator shall come with two remotes. B. Gate shall have an exit loop and safety eye. C. Gate shall have a programmable timer. D. Battery backup – 100 full cycles E. Operating speed – 12” per second F. Lightning strike protection up to 20,000 / 10,000 amps