Specifications include, but are not limited to: A. Jackets, hats, and pants must be dark navy in color with gold trim. These colors must closely match those of TPD’s current Class A uniforms, which are Flying Cross Class A trouser in color 86 LAPD navy with 1/8” gold soutache applied to the outside seam of pant leg. Flying Cross Class A long sleeve shirt in color 86 LAPD navy. B. Jackets Specifications 1. High collar design with epaulettes on each shoulder, all trimmed with gold piping 2. Pockets on each breast, held down with a single button 3. Trimmed sleeve bottoms with gold trim and three buttons 4. Five button front 5. All buttons will be gold in color with a “P” signifying police 6. Cloth badge holder 7. 45/55 Wool/Polyester blend material 8. One inch (1”) gold shoulder cords C. Kilt Jacket Specifications 1. Same as above except i. Four button front ii. Trimmed at the belt level and designed specifically to be worn with kilts D. Pant Specifications 1. 45/55 Wool/Polyester blend material 2. Two front pockets 3. Two rear pockets 4. Gold piping trim not to exceed a quarter inch (¼”) in width E. Hat Specifications 1. Mesh frame with visor 2. Trimmed hole for badge application 3. Gold cap strap pins on each side with “P” insignia 4. Gold cap strap