Specifications include, but are not limited to: 2.001 CHASSIS The chassis provided will be a new, commercially available chassis. The chassis will be designed and manufactured for heavy-duty service, with adequate strength and capacity for the intended load to be sustained and the type of service required. 2.002 WHEELBASE The wheelbase of the vehicle will be no greater than 265”. 2.003 GVW RATING The gross vehicle weight rating will be a minimum of 66,000 lbs. 2.004 FRAME AND FRAME LINER The chassis frame will be constructed of 120,000 psi yield, heat treated alloy steel. In addition, a ¼” inner frame reinforcement will be provided. The frame rails will be coated for rust resistance prior to painting. 2.005 FRONT NON DRIVE AXLE, SUSPENSION, AND BRAKES The front axle will be an "I" beam type, made of forged steel with a ground rating of 16,000 lb. Taper leaf springs and shock absorbers will be provided. The front brakes will be S-Cam, 16½” x 6” with automatic slack adjusters.