Specifications include, but are not limited to: The Smart Siren Platinum SSP2000B-KHP is a full featured, programmable electronic siren and light control system. The system shall consist of a control head and a remote siren amplifier/relay module utilizing Federal Signal’s Convergence Network. Communication between the control head and the amplifier unit is accomplished thru a 25’ RS485 serial cable. The intelligence of the system is contained in the control head and all system functions are controlled by the control head. System shall include a microphone and all necessary connections to the amplifier. The SSP2000B-KHP shall be preloaded with factory installed software compatible with the Legend lightbar flash patterns and switching sequences and auxiliary controls including the Park Deactivation siren kill feature and white light cutoff. 2. REMOTE SIREN AMPLIFIER 2.1 Amplifier unit shall be (case dimensions) 4.4” in height by 7.6” in width and 7.9” in depth. 2.2 Amplifier shall consist of an easily accessible external volume adjustment for radio rebroadcast and public address which includes visual confirmation that power is being supplied to the unit. 2.3 Amplifier shall consist of two rugged power terminals easily identified by black and red colored insulator covers. 2.4 Eleven (11) solid-state auxiliary relay outputs shall be provided for non-serial controlled lightbars, perimeter lights, and accessories. One- 10A high/low, six- 10A high relays and four- 2A high relays shall correspond to each individually fused auxiliary output. 2.5 Separate control head allows the amplifier unit to be remotely mounted. 2.6 Amplifier shall consist of two active low inputs and two active high inputs. Inputs can be set to activate a relay when the vehicle ignition is off. Ignition timer can be set in half hour increments from 0.5 up to 4 hours. Cable assembly P/N 17500308 shall be provided and install between the control head and the configurable steering wheel switches thru the Ford Police Interceptor’s fourteen-way connector, for example. Additional uses are trunk/door release, gun lock, intrusion alarms and monitoring K9 temperature systems. 2.7 Amplifier shall consist of three “Plug and Play” serial ports to be used for Federal Signal’s unique Convergence Network with one connection to the control head.