Specifications include, but are not limited to: 3.01 Chassis: Shall have a heavy-duty industrial type chassis with corresponding heavy-duty components. 3.02 Starting System: Shall be an individual key starter – master key ignition not acceptable. 3.03 Engine: Turbocharged diesel engine developing eighty five (85) SAE NET horsepower at 2,200 RPM. Dry type primary and secondary air filter with pre-cleaner. 3.04 Transmission: Shall be minimum four (4)-speed with full power shuttle, torque converter and equipped with differential lock. 3.05 Steering: Shall be power hydrostatic. 3.06 Tires: Front ten (10) ply cleat type, rear ten (10) ply cleat type. 3.07 Loader: Shall be minimum one (1) cubic yard (eighty-two inch {82"} wide with long lip) to cover entire front wheel width. Hydraulic, self-leveling with 5,480 lift capacity to full height. Break out force 8,300 pounds, return to dig function. Hinge pin height ten feet ten inches (10’ 10”); single lever control.