Specifications include, but are not limited to: (1) New/unused 2019 Truck and 60,000 pound Roll-off hoist & bed. The engine shall be diesel fueled wet sleeve design with a minimum of 12.5 at 430hp, turbo exhaust brake controlled from a dash mounted switch. The engine shall have a low oil pressure and high engine temperature engine shut down system. The engine must use an S.C.R. system to achieve compliance with E.P.A. 2019 emission standards. GANTRY: The gantry shall be capable of being extended 48” vertically by a 2” x 48” double acting hydraulic cylinder. The gantry extension tubes shall be a 3 1/2” x 3 1/2” x 3/16” tube housed in a 4” x 4” x 3/16” tube. TARP: The tarp shall be heavy nylon mesh with a solid 18 oz vinyl reinforcement on all sides. A full width reinforcement of 54” across the front and 72” across the rear to protect the tarp from wear. TARP ARMS: Pivoting arms shall be of a three piece design. Arms shall be constructed of 1 1/2” x 3” x3/16” tubing with a second1 1/2” x 3” x 3/16” tube from the pivot to the cylinder mount.