Specifications include, but are not limited to: One (1) Five (5') Foot Mower with snow removal attachments and cab for snow removal Mode!: Year shall be [2021] or latest model available. Engine: Minimum 35 hp, 3,000 rpm, liquid cooled diesel engine. Deck Assembly: 60" base deck with rear discharge. Five foot cutting width, 7 gauge welded steel, 1.25" spindles, and cutting height to go from I" to 6", full-floating with anti-scalp rollers. PTO driven with hydraulic lift and jack stand. Height of cut 1" to 6" in .50" increments. Ground Speed: Forward 0-12 mph and 0-8 mph in reverse. Transmission mounted directly to engine, via bell housing, two independent closed-loop circuits. One pump/motor controlling left side forward, neutral, and reverse, and one pump/motor controlling right side forward, neutral, and reverse. Controls: Key operated ignition switch. Steering to be adjustable twin sticks, Reverse/Neutral/Forward, located on sides of operator. 12 volt power port. Instrumentation: Mower to have volt, temperature, and hour meters. System alarms for water in fuel system, loss of oil pressure, water temperature, and non-charging alternator. Must include wireless hour meter monitoring system that is compatible with current parks software. Lighting: Road light kits with flashing amber/clear strobes front and rear. Lift Assist: Mower to be equipped with hydraulic lift-assist for easy adjustment in mowing height. Seats: Adjustable seat. High back, vinyl covered seat with fore/aft adjustment, adjustable arm rests, full- ride suspension. Safety: ANSI compliant. Manufacturers' standard ROPS, operator seat belt and attaching system. Construction: 10- gauge steel constructed chambers with 12-gauge wielded reinforcements
