Specifications include, but are not limited to: 1. Vendor shall clear identified project area of all current accumulation of snow/ice. Areas may include but are not limited to entrances, ADA ramps, crosswalks, sidewalks, driveways, and parking lots.; 2. De-icing materials shall be applied to all pedestrian access/egress points, walking, crosswalks, steps, sidewalks and ADA ramps during or immediately after snow removal. De-icing products must be environmentally friendly and approved for safe use on concrete and asphalt surfaces. De-icing product shall not be sand, unless specifically requested by county staff. De-icing materials are not required for parking areas.; 3. Vendor shall place cleared snow/ice in a safe location, onsite, not blocking foot traffic, handicap or other parking located directly in front of facility, or any location where damage to structure may occur.; 4. Vendor shall provide appropriate staffing and equipment to meet or exceed industry standards based on project size and depth of snow/ice. Vendor shall not use equipment that will cause damage to surface.; 5. Vendor shall notify requesting department immediately upon completion and remain on site until project completion satisfaction is met, or authority is provided by county staff to leave premises after hours.; 6. Vendor shall be responsible for using equipment and labor necessary for removal according to industry standards and best practices.
