3D Printer new or slightly used (No more than 3 years old) Must qualify for warranty • FFF printing technology • Dual extruder, up to 500°C nozzle temp • Heated build plate to 300°C with vacuum system • Heated chamber (300°C constant) • Minimum build volume: at least 23" x 19" x 19" • Supports open filament (1.75–2.85mm), including PEEK, PEKK, ULTEM, PPSU, PC, PA+CF, ABS, ASA, TPU, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, and others • Standard V6 nozzles that can be replaced with third-party options such as wear-resistant polycrystalline diamond-tipped nozzles • Auto bed leveling, auto nozzle cleaning • Water and air cooling • Certifications: FCC, CE • Connectivity: Wi-Fi, Ethernet, USB • Power failure recovery, filament jam detection, filament absence warning • Position resolution of 11-13 microns in X-Y plane and 6-8 microns in • Capable of printing with layer thicknesses ranging from 0.05 to 0.5 mm • Accepts STL and OBJ file formats; Filament Dry Storage Cabinet (No more than 3 years old) • Supports customizable drying profiles • Active air exchange system to periodically cycle humid air with fresh air • Capable of annealing printed parts • Drying temp up to 180°C • Direct filament feeding to printer • Two-chamber layout (each ~400 x 460 x 480mm) • Storage for: • 16 x 1Kg spools • 8 x 4.5Kg • 8 x 4.5Kg; Filament Supply (1.75 mm Diameter) PEEK 3 Kg
