Specifications include, but are not limited to: Fabric: 72" wide, 9 gauge, 2 oz. galvanizing, 2" mesh. Line Post: 2 3/8" O.D., full weight galvanized pipe, 3.65 lb. per foot. Line posts set 10' on center, maximum spacing. Concrete footing, 12" diameter x 36" deep. Terminal Post: 4" O.D., full weight galvanized, Concrete footing 12" diameter x 42" deep. Terminal Post for the swing gate: 8 5/8 O.D., full weight galvanized, Concrete footing 12" diameter x 42" deep. Bracing: Terminal posts braced and trussed to the nearest line post with 1 5/8" O.D., full weight pipe and 3/8" truss rod and truss rod tightener. Gates: Framework constructed of 1 7/8" full weight galvanized pipe, 2.72 lb. per foot. Gates to be braced and trussed as necessary. Same fabric as fence. Gate Post: 4" O.D. full weight galvanized pipe, 9.10 lb. per foot. Concrete footing, 12" diameter x 42" deep. Tension Wire: 7 gauge coil spring, Class III tension wire attached to bottom and top of fence fabric with 9 gauge aluminum hog ring spaced 24" on center. Barbed Wire: 3 strands 12 ½ gauge, 4 point, Class III on 45° pressed steel barbed wire arm. Fittings: Regular brace band & carriage bolt, pressed steel rail end, 45° pressed steel barbed wire arm, pressed steel cap, 3/16" x ¾" tension bar, regular tension band and carriage bolt. Tie wire: 8 ¼", 9 gauge aluminum tire wire and 6 ½", 9 gauge aluminum tire wire spaced 15" on center for line posts and 24" on center for rails. Post footing: Truck poured concrete.