Specifications include, but are not limited to: 1 1. Mast Arms and Poles 1.00 LS 2 2. Pedestal Poles 1.00 LS 3 3. Audible pedestrian pushbuttons 1.00 LS 4 4. Controller Cabinets 1.00 LS 5 5. Controller 1.00 LS 1. Surface Preparation of Steel Parts a. Galvanize in accordance with Specification F-1. b. Remove detrimental weld flux slag deposits mechanically. c. Protect cleaned assemblies from moisture and other foreign materials prior to prime painting. Keep indoors. d. Parts which are coated with zinc, aluminum, or galvanized do not require F-1. e. Solvent wipe per SSPC SP1 f. Brushblast to a uniform dull appearance free of any shine and preheat, prior to prime painting. g. Mechanically galvanized parts do not require brushblast. 2. Prime Coat a. Valmont part number: 347277 b. Color: Gray c. Manufacturer and #: Tnemec Series N69 or 66 d. Total Thickness (DFT): See List Below e. Thinner: Tnemec #4 Valmont Part #: X159047 3. Top Coat a. Valmont part number: See list below. b. Color: See list below. Add identification (ID) letter to number for complete designation of paint system. c. Total Thickness (DFT): See List Below d. Curing Time: 1. To Handle: 6 Hours 2. To Recoat 8 Hours e. Thinner: Tnemec #68 Valmont Part #: 350047 4. Application a. Remove moisture, oil, grease, loose paint or other foreign material prior to painting using a clean rag saturated with thinner or solvent. b. Prior to applying top coat, repair amy surface imperfections such as sags or runs by light sanding obtain a uniform surface. Also apply prime paint as necessary to any voids or areas having less than the required thickness. c. Apply full body with airless spray equipment.