Specifications include, but are not limited to: Ability to work with existing equipment AFM offered must have the capability to work with customer existing Inverted Light Microscope. Scan HeadZ actuator with >15um of range850nm IR super luminescent diodeLow noise sensor Motorized Scan StageMotorized scan stage XY scan stage (100um x 100um scan range in closed-loop)Motorized precision XY stage (10mm x 10mm range)Movement enabled by joystick and/or software controls Laser AlignmentFast and simple laser alignment ability onthe cantilever in both air and in fluid Sample Heater AccessoryTemperature control up to 40°C during imaging60°C temperature for sample processing for use with both high and low magnification objectivesTwo sample heaters for use with: (1) low magnification, dry objectives withworking distance >1.1mm; and (2) high magnification oil/water immersion objectives anddry objectives with working distance <1.1mm.Sample heaters should have ability to accommodate standard microscope slides (25 x 75mm), cover slips(25mm square and round),polystyrene petri dishes (35mm and 60mm), and 50mm Willco Wells glass bottom dishes.