1. Interior Wall Services 1.1. Interior Wall/Gypsum Board: 1.1.1. Patch, repair, and replacement of standard (1/2" or 5/8") panels 1.1.2. Installation of insulation within wall cavities as required for code or specific job. 1.1.3. Taping, mudding, and preparation for painting. 1.2. Plaster and Lath: 1.2.1. Repair and restoration of historic or traditional plaster finishes. 1.3. Specialized Interior Wall Finishes: 1.3.1. Installation and repair of Fiber-Reinforced Plastic panels. 1.3.2. Installation and repair of wall protection systems (e.g., bumper rails, corner guards). 1.3.3. Repair of demountable/movable partition systems. 1.4. Structural Damage Repair: 1.4.1. Repair of wall damage caused by water intrusion, impact, or minor structural settling. 2. Interior Ceiling Services 2.1. Acoustical Ceiling Systems: 2.1.1. Repair and replacement of standard lay-in ceiling tile 2.1.2. Repair and replacement of damaged T-bar grid suspension systems. 2.1.3. Replacement of specialized tiles. 2.2. Hard Lid Ceilings: 2.2.1. Repair and replacement of gypsum board or plaster ceilings, including scaffolding and lift operations. 2.3. Access Panels and Vents: 2.3.1. Installation, alignment, and repair of ceiling access panels, diffusers, and vents removed during repair work. 3. Exterior Wall Service (Intended for Minor Repairs Only) 3.1. Repair of exterior sheathing and insulation exposed due to damage 3.2. Minor patching and sealing of cracks in stucco, brick veneer, or siding adjacent to interior repairs. 3.3. Waterproofing and sealing around newly repaired areas to prevent further intrusion.
