Network compatibility All new cameras are to be supported by wired or optical Ethernet connections Must support minimum of 100Base-T Must support POE, IEEE 802.11AF All patch cords must be Systimax certified. LAN jacks provided by ISU at an agreed location for new installs. Pan/Tilt/Zoom Cameras - Provide and install Axis or equivalent PTZ cameras with following requirements Camera shall include a browser based PTZ control. Camera shall include auto-focus built in. Shall be fully compliant with IEEE 802.3AF Motorized PTZ cameras must have a minimum 12x optical zoom. Camera and/or video system shall include a pre and post event buffer for motion events. Fixed Cameras provide and install fixed indoor Axis or equivalent cameras and mounting brackets Camera shall include a vandal-resistant enclosure. Shall have the ability to be powered over standard CAT6 cabling. Shall be fully compliant with IEEE 802.3AF Progressive scan CCD required. Up to 30 frames per second in all available resolutions. Motion detection shall be built in, with pre and post buffering in hardware. Camera shall include built in security to deter non-authorized persons from accessing the camera’s feature set or image stream. Camera should include motion or scheduled event ability to trigger communication with the server for recording or alerting personnel. Fixed cameras will have varifocal lenses Camera/monitor combination units will need to store images in the manner as other cameras
