CAR FIRE PROP TRAINER: ➢ Flame pilot ignition system and burner control system. ➢ Stainless-steel water-cooled box to hold the pilot module system. ➢ One (1) 4’ x 6’ stainless-steel fire pan ➢ One (1) fifty (50) foot propane liquid supply hose with adaptors. ➢ One (1) fifty (50) foot propane vapor supply hose with adaptors. ➢ Six (6) foot propane liquid and vapor stainless-steel distribution hoses with adaptors. ➢ One (1) fifty (50) foot 120 VAC power cable. ➢ One (1) wireless pistol grip control module. ➢ The car fire prop trainer needs to be accessible from all four sides. ➢ Minimal dimensions of 12.5’L x 5’W x 4.5’H ➢ Weight approximately 2000 pounds ➢ Automobile mock-up with multiple burn areas including interior passenger area, engine compartment, and wheel well. ➢ Automobile mock-up is 6-guage steel construction with heat resistant paint for extended service life. ➢ Liquid propane OR vapor propane main fires. ➢ Breach-able hood and headlight with replacement sacrificial panels. ➢ Incorporated sprinkler pipe along interior of roof for self-cooling. ➢ Driver’s side door, passenger side door, hood, and trunk are all hinged and fully functional. ➢ Hood and truck lids are 6-gauge steel with laser cutouts for flame extension. ➢ Driver and passenger seat mock-ups. ➢ Entire unit is on skis of sufficient size to bear the weight of the prop. ➢ All necessary gas hoses and electrical cables for complete set-up and operation. ➢ Complete shut down in less than five (5) seconds. ➢ Set-up and training to Iowa Fire Service Training Bureau staff provided by seller ➢ All shipping costs provided.
