GROUND ROD CLAMP, 5/8" ROD SIZE, 8 SOL-1/0 STR. * CITY STOCK # 858 001 00022 * GROUND ROD CLAMP, CAST ALUMINUM BRONZE, FOR 5/8" ROD SIZE, CONDUCTOR RANGE 8 SOL -1/0 STR, WIRE DIAMETER RANGE .128-.375. TO BE FURNISHED WITH 7/16" SILICON BRONZE HEXAGON HEAD BOLT. * ERITECH #HDC58 ONLY. * BURNDY GRC58 NOT ACCEPTABLE. ERITECH #CP58 NOT ACCEPTABLE.; CONN, COMPRN ALUM BLKBRN WR139 * CITY STOCK # 858 001 00031 * COMPRESSION CONNECTOR, WIDE RANGE, ALUMINUM. * BLACKBURN WR 139 ONLY; CONN, COMPRN ALUM BLKBRN WR289 * CITY STOCK # 858 001 00036 * COMPRESSION CONNECTOR, WIDE RANGE, ALUMINUM. * BLACKBURN WR 289 ONLY. Shaft: The pole shaft shall be constructed of kiln-dried, glue laminated Douglas Fir only, L1 laminating grade for strength and appearance. The adhesives shall meet or exceed the performance and strength requirements of ANSI/AITC A190.1. Open defects such as knot holes exceeding 1/2” in diameter or wane exceeding 1/4”x12” shall be filled with wood filler. Sides shall be S4S with edges eased to 3/8” radius. A 1” x 1-1/4” internal raceway shall run the full length of the pole. The edges of the raceway shall be smooth as to not damage wires. Dimensions: The pole shaft shall be 5-1/8” x 5-3/4”. The overall shaft length shall be 30 feet. Tolerances shall be from +0 to -1/8” for width and ±1/4” in length. Treatment: All poles shall be preservative treated per AWPA standards. All cuts and drilling shall be made prior to treatment. There shall be treatment penetration 3/16” from any surface and 3” longitudinally from holes and ends.
