The Contractor shall provide all labor, materials, equipment, and supervision necessary to complete the following tasks: Site Assessment & Verification: Conduct a thorough site assessment to verify the existing fixture count, types, and wiring configurations in the FMS and for exterior wall packs plus visual displays if required. This assessment will be used to finalize the materials list and confirm project feasibility and costs. A detailed report including photos and fixture schedule will be provided to the Owner. Fixture Removal: Carefully remove all existing non-LED lighting fixtures. Contractor is responsible for proper disposal of all removed fixtures in accordance with local, state, and federal regulations (including any hazardous waste disposal requirements – see section 6 regarding environmental considerations). Contractor will repair any damage to walls, ceilings, or facility that may occur during replacement. LED Fixture Installation: Install new LED lighting fixtures as specified in Section 3 (Materials). Installation shall include: Mounting fixtures securely to existing structures. Connecting fixtures to existing wiring, ensuring all connections are code-compliant and safe. Testing all fixtures to ensure proper operation. Control Device Installation: Install occupancy sensors, dimmer switches, and photocell devices as specified in Section 3. Exterior Wall Pack Replacement: Remove existing exterior wall pack fixtures and replace with new LED wall pack fixtures as specified in Section 3. System Testing & Commissioning: After installation, the Contractor shall test all lighting systems and control systems, if equipped, to ensure proper functionality and compliance with specifications. A final commissioning report will be provided to the Owner. This report will include programming details for all controlled devices if applicable. Clean-up: Thoroughly clean the work areas, removing all debris and materials related to the project daily and upon project completion.
