Specifications include, but are not limited to: Systems offered should have the following minimum specifications: Capable of performing above mentioned applications with stated samples Minimum working area: approx.39 x 24 Sealed-off CO2 laser or similar Automatic focusing that enables automatic and proper focusing of the laser beam on the work piece surface Including focus lens 2.0 (51 mm) or similar Temperature sensor that can monitor the temperature of the work area and if unusually high temperature is detected, the system will turn off the laser and trigger an audible alarm must be transported through and installed in a lab with 34.5 width opening Operating/control software included for cutting/etching of fabrics on the machine Capable of interfacing with files generated using Adobe Photoshop, Illustrator graphic design software and usage of these files in controlling cutting and etching of patterns/fabrics Computer/Monitor included (quote as separate line of item(s) with detailed specifications) System to be offered complete with all parts installed in ISUs designated laboratory Minimum one day training is required after installation
