Specifications include, but are not limited to: The State of Iowa Department of Administrative Services (DAS) is seeking professional design services for removal and replacement of the ballasted roofing and repairs to the precast soffit on the East & West living units located at the Iowa Medical Classification Center (IMCC) 2700 Coral Ridge Ave, Coralville, IA 52241. Construction Manager The Samuels Group has been engaged for this Project to serve as advisor to DAS and to provide assistance in administrating the Contract for Design between DAS and the Designer according to separate contract between DAS and Construction Manager. DAS is currently seeking design services from qualified firms for a project consisting of the replacement of the ballasted roofing system and downspouts and soffit repairs on the East / West Living Units at the IMCC facility. 1.3.1 The contract for this work will be a modified ConsensusDoc 803. See link on cover page for a sample contract. 1.3.2 All design disciplines necessary to complete the scope of work. 1.3.3 Attend design kick‐off meeting onsite to discuss desired outcome of the project with the Owner, Construction Manager, and Owner’s maintenance staff. 1.3.4 Use of the State of Iowa‘s construction management software program for uploading all documents, submitting and approving pay apps, and construction administration. The cost for the use of the software is paid by the Owner. 1.3.5 Replace existing ballasted roofing system, metal fascia and downspouts on the East / West Living Unit and repair the existing precast soffit around the perimeter of the buildings. The existing soffit is crumbling. In 2021, a project removed concrete that had already deteriorated and applied a surface sealant to slow down the deterioration. It is anticipated the full repair will include some type of wrapping and potential further removal, dependent upon the designer’s recommendation and consultation with the State Historical Preservation Office. 1.3.6 Existing PDF drawings will be provided to the successful design firm. Accuracy of drawings shall be verified by the design firm.
