Specifications include, but are not limited to: A. Overall trailer length shall not exceed fifty-three (53) feet. Overall trailer length: __________________feet yes no B. Overall width shall not exceed eight (8) feet, six (6) inches. Overall width: ___________________feet yes noC. Spindle type: parallel spindles with same inner and outer bearings.yes noD. Anti-lock brakes: 4S/2M with in-cab warning light. yes noE. Kingpin Plate: WGSuper bolt-on 4” increments, 2” adjustments or INDOT approved alternate.yes noF. Landing gear: 2-speed with sand shoes, curbside crank.yes noG. Spring suspension: Minimum of 3 leaf springs.yes noH.Fenders: Aluminum contour rear, mounted at 96” OAW.yes noI. All carbon steel parts to be primed and painted black.yesnoJ. Bumper: 4”X4” square tube, 88” wide per DOT NHTSA rules.yes noK.Rear splash guards (non logo), black in color, and all mounting hardware shall be provided.yes noL.A round 7-way plug must be provided and wired per SAE J560 compliant. Deviations must be approved by INDOT. Wiring layout to be approved by INDOT.yes noM.Outlet gaskets to be Teflon envelope gaskets on all flanged connections.yes noN. Seals: provisions to be provided for all inlets and outlets that are intended to open and close regularly. Plastic coated cables to be on all inlet and outlet caps. Out lets fittings to be 4” cam style adapter with dust cap on each outlet.yes noO. 4” mountingpad at rear for sump.yes noP. Piping: 4” X 4” X 90-degreeelbow with pipe extension torear.yes noQ.Outlet valve: 4” ball valve on each outlet.yes noR. Rear frame: Additional frame length of 3’ from head seam to end to allow room for customized pump andspray equipment to be installed at a later time.