Specifications include, but are not limited to:The work to be performed consists of furnishing and delivering sodium chloride to various locations throughout Indiana for use in winter maintenance operations. Sodium Chloride will be in accordance with the 2014 Indiana Department of Transportation Standard Specifications (Sections 913.03) and the Supplemental Specifications at bid due date and time, and all applicable rules and regulations at the federal, state and local levels. 2.0 SPECIFICATIONS Sodium Chloride Sodium Chloride shall be rock salt or solar salt conforming to the requirements of AASHTO M l43, Type I Grade I, with a moisture content not exceeding two (2) percent. Sampling shall be in accordance with Indiana Testing Method (ITM) 810). Sampling frequency shall be as set out in the INDOT manual entitled, "Manual for Frequency of Sampling and Testing and Basis for Use of Materials, revised January 2015" The rapid test method referenced in AASHTO M 143, Annex A1 shall be used for both routine acceptance testing and for resolution of disputes concerning chemical composition. Material not complying with these requirements shall be paid for at a reduced price as set out under "Deductions" in the Special Provisions (See Section 8.0). All material furnished shall be chemically treated to prevent caking, and shall be free of foreign matter, lumps and free water. 3.0 INSPECTION
