Specifications include, but are not limited to:Chassis: Tandem axle, conventional cab, 2010 model or newer, with a maximum wheelbase of 215 inches. Front Axle: 12,000 lbs. with multi-leaf suspension. Rear Axle: 40,000 lbs. with air-ride suspension. Engine: 410 horsepower minimum diesel engine. Engine must be at least 13-Liter displacement and must have less than 600,000 miles (verified through printout from engine ECM). Bid to also include a fresh PM service with paperwork. Engine coolant to be tested with written verification. Transmission: Acceptable transmissions are 10, 13 or 18 speed manual with PTO provision, or Allison 4000RDS automatic. Exhaust: Vertical stack to direct exhaust away from work crews at ground level. If truck is equipped with an aftertreatment system, it must be inspected and pass with written verification. A manual regeneration must also be performed. Frame: 110,000 PSI minimum. Full-width front bumper. Brakes: Full air front and rear. Brake lining must be at a minimum of 50%. Cab: Conventional 2-man, air-ride cab. Driver’s seat must also be air-ride and without wholes or tears in the seat material. All gauges must be in working order. Air conditioning system to be tested with written paperwork to verify temperature setting. Only normal wear and tear to the cab is acceptable. Any significant collision or contact damage must be repaired.