Specifications include, but are not limited to: The buses shall also be required to have the following specifications: 1.2.1.1 Driver seat to be air ride seat, with twin arms and cloth upholstery; 1.2.1.2 Have 28” driver seat knee space, if possible; 1.2.1.3 Three (3) separate switches for aisle lights located two (2) rows behind driver, in the mid-section, and in the rear section; 1.2.1.4 Separate drivers dome light switch; 1.2.1.5 Shaded windshield for driver 8” by 30” sun visor; 1.2.1.6 Tilt/telescoping steering wheel; 1.2.1.7 Cup holder for the driver; 1.2.1.8 Flip up seat cushions; 1.2.1.9 Radio and speakers thru bus with controls; 1.2.1.10 Cruise control; 1.2.1.11 Two electric fans for front windows; 1.2.1.12 Remote control side mirrors European Style heated; 1.2.1.13 Overhead storage in driver’s compartment; 1.2.1.14 Three (3) air conditioning units located in the front, middle and rear with separate controls on driver’s dash; 1.2.1.15 Three (3) floor heaters located in the front, middle and rear with separate controls on driver’s dash; 1.2.1.16 Engine block heater; 1.2.1.17 Change motor to a Cummins 6.7L 260 HP in line 6-cylinder diesel; 1.2.1.18 Change transmission to a 5 or 6-speed automatic Allison 3000 Series w/synthetic fluid; 1.2.1.19 Upgrade the pre-heater to a 45K Pro Heater option; 1.2.1.20 Water pump for heaters; 1.2.1.21 Heated fuel and water separator; 1.2.1.22 Auxiliary coolant heater; 1.2.1.23 Roll out battery tray;