Specifications include, but are not limited to: 1.5.1. Vehicles shall be new (unused), manufacturer’s models in production at the time of the contract or time or order. Vehicles shall be completely prepared for delivery by dealer in accordance with manufacturer’s specifications. 1.5.2. An owner’s manual shall be provided with each vehicle. Advertising and vehicle information: no vehicle will be accepted if there appears on any portion of the vehicle a dealer logo of any kind (decals, etc.); however, all new vehicle information, as required by law and regulation, shall be affixed at the time of delivery (window sticker, E.P.A. mileage information, etc.). 1.5.3. All vehicles must be in accordance with the following criteria: 1.5.3.a. Specifications: unless otherwise required in this Invitation For Bid, all vehicles must be equipped with all the manufacturer’s equipment advertised as standard consumer equipment. Standard or optional equipment must be OEM (original equipment manufacturer) unless specifically allowed for in the commodity description. All vehicles must meet all applicable federal and/or state motor vehicle safety standards and governmental emission requirements in effect at the time of purchase. 1.5.3.b. Fuel: all vehicles delivered must include a minimum of one-quarter (1/4) tank of fuel as registered by the vehicle fuel gauge at time of delivery. 1.5.3.c. Anti-freeze: permanent type, protection to -20 degree F. Radiator to be so notated in a semi-permanent manner (tagged). 1.5.3.d. Tires and wheels: to be equipped with original equipment, tires of the size and load range required by the manufacturer for the model and/or gross vehicle weight rating (GVWR). Spare tire, wheel and carrier (hold-down) to be original equipment and to be included on all applicable vehicles.