Specifications include, but are not limited to: The Cities of Geneva and St. Charles (Cities) are requesting Qualifications (RFQ) from your Consulting Firm to perform phase I design engineering services for Kautz Road. 1. Data Collection and Field Investigation a. Review of As-Builts, Subdivision Plans and Existing Utility Investigations performed by the Cities. • Full topographic survey. Cross-sections to be surveyed at least every 50 feet. • Limits to include entire area within the Right-Of-Way plus up to the front of the houses on either side of the street. • For side streets, a minimum of 100’ outside of the intersection shall be surveyed. • All features within the above area shall be surveyed, including but not limited to utilities, sidewalk, driveways, trees, landscaping, property corners, lighting, etc. • All material types shall be noted. • Survey all high and low points within survey limits. • Partial sections required at all driveways. • For utility structures all pipe information include inverts, pipe material, etc. shall be surveyed and noted on the base drawing. • Complete base drawing preparation in Microstation format • Establishing the existing Right-Of-Way. • All existing field data and electronic files shall be submitted to the Cities. • The Cities will provide a copy of all available information regarding existing utilities, old roadway plans, easement information and plat information. b. JULIE Design Locate.