Specifications include, but are not limited to: a. The Respondent shall furnish all labor, materials, and equipment necessary to perform the work and prepare the reports as described herein. b. The Work includes full depth coring of rigid, flexible, and/or composite pavements to determine the pavement thickness. 2. Field Work a. The Village will provide an exhibit for each location and mark out boring locations in the field with white paint prior to the commencement of Work. b. The Respondent shall contact J.U.L.I.E. (1-800-892-0123 or 811) at least 48 hours prior to the start of work. The Respondent shall report any discrepancies or conflicts to the Village prior to the start of work. c. All streets, alleys, and parking lots must remain open to traffic and other services throughout the work. The Respondent will be responsible for providing and maintaining traffic control measures in accordance with the current edition of the MUTCD. The Village will supply “No Parking” signs at no expense to the Respondent. The “No Parking” signs must be posted at least 48-hours in advance of work. d. The Respondent is responsible for advancing cores (4-inch diameter) and borings to a: i. Depth up to 2 feet below the pavement surface on ROADS (locations identified with an “R”) to obtain the pavement cross section, ii. Depth of 5 feet below the pavement surface on ALLEYS (locations identified with an ID #) to obtain the pavement cross section and soil boring, iii. Depth of 10 feet below the pavement surface on BRICKS and PARKING LOTS (locations identified with an “B” or “P”) to obtain the pavement cross section and soil boring. e. The Respondent shall collect two (2) soil pH samples per boring; 80 total samples for the service. If soils are not encountered in the boring, the Respondent shall collect a pH sample in a parkway immediately adjacent to the boring. Sample must be taken under the topsoil. Any parkway collections will be considered incidental to the scope of work and included in the total service amount. The report shall highlight if the pH sample was collected outside the boring...