Specifications include, but are not limited to: 1.Roofing: Remove all shingles and felt paper down to the original roof deck. As part of the bid, the contractor will identify the amount of roof decking needed, if any, and replace with similar material. The Contractor shall install a minimum of 30# felt paper and new Owens Corning Oakridge or Midrange Architectural shingles, or comparable. Contractor shall replace flashing and boots at all penetrations, valleys, and drip edges. All materials and quantity to be itemized on the bid sheet. Color is TBD, scope to include new ice/water shield drip edge, roof vent system. 2.Mechanical: Install 2 new A/C Roof units, calculated size of units to be determined by contractor to ensure business will cool in Midwest Zone climate extremes. Please investigate the existing conditions of the business such as insulation to make proper sizing determination. Cost of all electrical circuitry required for operation of new system shall be included in this line of scope. 3.Rear Entry Door(s): Remove and replace (2) 36” commercial doors. 4.Lighting: Remove and replace existing exterior lighting fixtures, with new LED lighting fixtures.