Specifications include, but are not limited to: Kit package – maximum size of 12" in length by 8" in width. Kit must contain all of the components listed below. Kit must be durable, tear resistant, water, and chemical resistant plastic package with zip or easy tear style opening (See attachment). 1 ea. - kit component package- maximum size of 12" length x 8" width, minimum size to contain all of the kit components listed below. Durable, tear resistant, water, & chemical resistant plastic package with zip or easy tear style opening. 1 ea. - pre-printed addressed return envelope with business reply mail – minimum size of 9.5" length to the fold x 5" width, maximum size 11.25" x 6". White, tear, water, & chemical resistant flap with self-seal. "Affix kit shipping seal here" is to be printed on front side of envelope to be visible when flap is sealed. Envelope must be made from a material equivalent to Tyvek or other high-density polyethylene fiber. Address information must be printed on envelope in red ink. Final artwork for business reply mail address will be supplied to the successful bidder. 1 ea. - kit/form - printed on white, 67# vellum bristol, flat size of 14" length x 8 1/2" width. Form will have two scores and one perforation (see attached printing diagram) and can be folded in four sections. Fold size is approximately 3 2/3" wide and the perforated section is 3" wide. Printing font for form will be uniform to fit size of columns and dimensions of form. Fill-in box numbers will be the number and size specified in the example. 1 ea. - Swab envelope - maximum of 8" length x 3 1/4" width. Must be white and the flap should have self-seal peel off tape. Envelope will be affixed to back side of kit/form in designated area (see attached printing diagram). Printing must be in black ink. Envelope will be printed with directions for removing tape, sealing envelope, and a space for the subject's name. Printed or affixed orange 1"x1" biohazard label. The envelope must contain a desiccant packet equivalent to Desiccare.